Wheelchair friendly

The large underfoot space of the ST-26 allows a patient in a wheelchair to be examined quickly and comfortably.

The ST-26T with a T-shaped base has its column at the side of the table. The ST-26H with a H-shaped base has its column at the center of the table.

*Wheelchairs with a front wheel outer width of 550mm or less are adaptable. *It is recommended to fold up the footsteps of the wheelchair during examination.

Careful consideration of cable positioning

Access hole is placed on the table top to pass a power cable through, and three auxiliary power outlets under the table top allow to power a full range of products without any need to run extra cables to a standard mains power supply.

The mains power cable for the ST-26H extends from the side of the base eliminating interference with patient’s feet.

Heavy load capability

With a load capacity of 80 kg, the
ST-26H is well designed to withstand
heavy equipment such as MT-325UD
projection perimeter.

Large elevation stroke for all patient heights

Minimum height of the table is now approximately 100 mm lower than that of the previous model meaning small children can be easily examined.

Without changing maximum height from the previous models, both the ST-26T and ST-26H have a 300 mm elevation stroke to accommodate small to large patients sufficiently.

Space saving design

While the size of the table top for the ST-26T remains the same as our previous model, the design change of the elevation unit achieved an overall width reduction of 14%, enabling ST-26T to be used efficiently in a limited space.

Various kinds of table tops

Various shapes of table tops for the ST-26H are available to choose according to user requirements and applications.

*The optional 600mm x 400mm table top is recommended. *Table top for the MT-325UD Perimeter is included as standard with MT-325UD. *Please contact our sales department for full details on available table tops.

ST-26T

ST-26H