Minimum chair height is now approximately 30mm lower than that of the previous model, accommodating all patient heights sufficiently with a large 150mm elevation stroke.
New CR-750 / CR-750S chairs can be raised and lowered with the Up / Down switches located on the lower back of the chair, allowing medical assistants to quickly and conveniently adjust the chair height.
By connecting to the Ophthalmic Workstation, Smart Table, or Electric Instrument Table, the chair elevation can be controlled by the buttons on the instrument table. More comfortable legroom is achieved as there is no need to place a foot pedal on the floor.
*Contact our Sales Department with the serial number of the product you use.
By fitting a slide mechanism, the chair can slide forwards up to 60mm while the patient remains seated, allowing the patient to be situated closer to the instrument for examination if required, without moving the entire chair.
*Factory option only, not sold separately.
Square seats are supplied as standard, a round seat can be supplied as an option. Seats are easily installed with screws at four locations.
|Allowed load||up to 150kg|
|Input Power||AC120-230V 50/60Hz|
5x step Galilean type, converging optics, upper LED illumination, and built in background illumination
2x step Greenough type with converging optics and upper LED illumination
5x step Galilean type, converging optics, lower LED illumination, and built in background illumination
3x step Galilean type with converging optics and lower LED illumination
5x step Galilean type with converging optics and lower Halogen illumination
Wheelchair compatible motorised table with fingertip swipe movement function , LED back-lit switches and manual slide mechanism